Channel Track
- Dimensions: 2-5/8″w x 2-3/4″h
- Zinc Black Finish
- Weight: 2lbs PLF
Cut Sheet
Single Carrier
- 2 Performance Thermal Plastic Rubber Wheels
- Durometer: 80A
- Swivel hook and 6” trim chain for curtain attachment & leveling
- Carrier load rating at 12” center spacing: 25lbs
Cut Sheet
Master Carrier
- 4 Performance Thermal Plastic Rubber Wheels
- Durometer: 80A
- 2 Clamps provided for securing operating line.
- 1 pair required for overlapping tracks
Cut Sheet
- 4” Diameter Nylon sheaves with shielded ball bearings
- Steel housing clamps to track
Chain bracket for offstage tie-off of curtain edge
- 3/8” rope groove
Cut Sheet
Single End Pulley
- 4” Diameter Nylon Sheave with shielded ball bearings
- Steel housing clamps to underside of track
Chain bracket for offstage tie-off of curtain edge
- 3/8” rope groove
Cut Sheet
Overlap Clamp
- Fixed bracket to create standard offset
of tracks in a bi-part assembly
• Formed steel plates with adjustment bolts
for track alignment
• Black finish
Cut Sheet
Clamp Hanger
- Formed steel enclosure brackets clamp top side of track
- Adjusts for various positions
Cut Sheet
Splice
- Formed steel enclosure brackets to align and lock multiple track sections for longer runs
Cut Sheet
Adjustable Floor Block
- 4” Diameter Nylon Sheave
Shielded ball bearings
- In steel housing for floor mounted installation
- 9” Vertical adjustment
- 3/8” rope groove
Cut Sheet
End Stop
- Compression fitting typically installed at tracks end to prevent carrier moving beyond end of track
- Tapped and formed steel U-Shaped
5/16” eye bolt for ease of installation of tie-off of curtain end
Cut Sheet
8″ Double End Pulley
- 8” Diameter Nylon Sheaves with sealed ball bearings
- Steel housing clamps to underside of track
Chain bracket for offstage tie-off of curtain edge
- Grooved for up to ½” operating line
Cut Sheet
8″ Single End Pulley
- 8” Diameter Nylatron GS sheave with sealed precision ball bearings
- Heavy-duty steel housing clamps to underside of track
- Chain bracket for securing offstage curtain edge
- Grooved for up to ½” operating line
Cut Sheet
Slant Pulley
- Slated Dead End
- 8″ nylon sheave with sealed ball bearings
- ½” rope groove
Cut Sheet
8″ Adjustable Floor Block
- 8” Diameter Nylon sheave with sealed ball bearings
- In steel house for floor mounted installation
- 9” Vertical adjustment
- ½” rope groove
Cut Sheet
Center Pipe Support
- Creates hanging position of the center of two track overlapping each in a bi-part assembly
- Formed steel plate with mounting holes
Cut Sheet
Ceiling Splice
- Two formed steel members to create a hold splice with track is directly mounting to along its top surface
- Formed steel plate with through bolts for installation
Cut Sheet
Backpack
- Assembly of a single plate with (2) rubber washers
- The assembly creates an pull off effect of the curtain in moving into storage position
- Supplied with rubber washers
- Options for 3/8″ or 1/2″ rope
Cut Sheet
Overlapping Master Carrier
- Allows curtain to overlap each other on a single track section
- 5 Performance Thermal Plastic Rubber Wheels
- Durometer: 80A
- Provided with (3) trim chains for curtain tie-off
Cut Sheet
Wall Mount Track Bracket
- Formed steel wall bracket for mounting of curtain track
- Universal design for mounting in two directions
- Mounting surface utilizes holes and slots for ease of installation
- Bracket are powder coated in black finish
- Load Rating: 150lbs
- Custom colors available
Cut Sheet
